桥梁横向伸缩对无砟轨道的变形影响研究

Abstract
Figure/Table
References (0)
Related Citation (6)

Download: PDF (876 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Abstract：Research purposes：In the case of the concrete bridge connected to roadbed or steel bridge, with the temperature changes, due to differences in scale-displacement of the beam seams on both sides, the force and track alignment irregularity would be impacted of ballastless track on bridge. Through the establishment of the line, plates, bridges, piers integrated space coupling model, this article analyses the forces of track structure near the beam seams and the influential factors of track alignment irregularity, and confirms the value range corresponding to the main factors, so as to provide theoretical guidance for the subsequent bridge bearings, line spacing design.
Research conclusions：(1) The track plate temperature changes will cause track gauge change, but will not cause the gauge overrun. (2) CA mortar layer and rail friction resistance have a little influence on track alignment irregularity and boss force in vertical and horizontal distribution coefficients and lateral stiffness on the pier, however, temperature change width of the steel beams and distance from transversely fixed bearing to the centerline would have great impact. (3) According to the track alignment irregularity limits, distance limits between lateral movable supports and fixed bearings are determined under different conditions of temperature increase and line spacing the distance, providing theoretical guidance for bridge bearings settings. (4) The research results have been applied to ballastless track design of Chengdu-Mianyang-Leshan Railway.


Key words： Key words: ballastless track spatial coupling model track alignment irregularity distance between centers of tracks

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TIAN Chun-xiang

Cite this article:

TIAN Chun-xiang. Research on the Influence of Lateral Expansion of Bridge on the Deformation of the Ballastless Track

[J]. 铁道工程学报, 2015, 32(3): 25-.

URL:

http://tdgcxb.crec.cn/EN/ OR http://tdgcxb.crec.cn/EN/Y2015/V32/I3/25

［1］中铁二院工程集团有限责任公司，西南交通大学. 大跨桥梁轨道变形控制与应用［D］. 成都：中铁二院工程集团有限责任公司，2014.
China Railway Eryuan Engineering Group Co.Ltd, Southwest Jiaotong University. Control and Application of Deformation of Track Structure on Long-span Bridges［D］. Chengdu：China Railway Eryuan Engineering Group Co.Ltd, 2014.
［2］崔丽红, 郭福安, 江忠贵, 等. 长大混凝土桥梁无砟轨道温度跨度的研究［J］. 铁道工程学报, 2012 (7):11-13.
Cui Lihong, Guo Fuan, Jiang Zhonggui, etc. Research on Temperature Span of Ballastless Track on Large-span Concrete Bridge［J］. Journal of Railway Engineering Society, 2012 (7):11-13.
［3］谢铠泽, 王平, 徐井芒, 等. 桥上单元板式无砟轨道无缝线路的适应性［J］. 西南交通大学学报, 2014 (4):649-655.
Xie Kaize, Wang Ping, Xu Jingmang, etc. Adaptability of Continuous Welded Rail of Unit Slab Non-〖JP〗ballst Track on Bridges［J］. Journal of Southwest Jiaotong University, 2014(4):649-655.
［4］Zhu Shengyang, Cai Chengbiao. Interface Damage and Its Effect on Vibrations of Slab Track under Temperature and Vehicle Dynamic Loads［J］. International Journal of Non-Linear Mechanics, 2014 (10):222-232
［5］全顺喜, 王平, 陈嵘. 钢桁梁梁端横向伸缩对轨道几何形位的影响［J］. 重庆交通大学学报(自然科学版), 2010(6):859-861.
   Quan Shunxi, Wang Ping, Chen Rong. Impact of Beam-end Lateral Expansion of Steel Truss Girder on Geometrical Shape of Track［J］. Journal of Chongqing Jiaotong University( Natural Science) , 2010(6):859-861.
［6］Rakesh K, Akhil U. Effect of Temperature Gradient on Track-bridge Interaction［J］. Interaction and Multiscale Mechanics,2012 (1):1-12.
［7］P Wang, JJ Ren, R Xiang, etc. Influence of Rub-plate Length on Forces and Displacements of Longitudinally Coupled Slab Track for a Bridge Turnout［J］. Jouranl of Rail and Rapid Trasit, 2012(226):284-293.
［8］谢铠泽,王平,徐浩,等. 刚构桥上无砟轨道无缝线路病害分析［J］. 中南大学学报(自然科学版), 2014(6):2085-2091.
   Xie Kaize, Wang Ping, Xu Hao, etc. Diseases of Continuous Welded Rail of Ballstless Track on Rigid Frame Bridge［J］. Journal of Central South University(Science and Technology), 2014(6):2085-2091.
［9］王平, 陈嵘, 杨荣山, 等. 桥上无缝道岔设计理论［M］. 成都:西南交通大学出版社, 2011.
   Wang Ping, Chen Rong, Yang Rongshan, etc. Research on the Design Method for Welded Turnout on Bridge［M］. Chengdu: Southwest Jiaotiong University Press, 2011.
［10］全顺喜. 高速道岔几何不平顺动力分析及其控制方法研究［D］. 成都:西南交通大学, 2012.
Quan Shunxi. Study on Dynamic Analysis and Control Methods of the Geometric Irregularity in High-speed Turnout［D］. Chengdu: Southwest Jiaotong University, 2012