|
|
|
| APPLICATION OF SOUND INTENSITY TECHNIQUE IN IDENTIFY THE NOISE SOURCES OF MAGLEV TRAIN |
| HUANG Pu，JIANG Wei-kang |
| State Key Laboratory of Vibration, Shock and Noise, Shanghai Jiaotong University |
|
|
|
|
Abstract The P-P technique in measuring the sound intensity is presented and the phase should be matched when using the P-P technique to measure the sound intensity. The noise sources of the running maglev train compartment are identified by using the sound intensity method. The results are studied by analyzing the transfer functions. We can drawn a condusion that when the train is running at the speed of 430km/h, the noise transmits into the compartment mainly from the wall of the train. The 1/3-octave spectrums of the sound intensity are studied and the contributions of frequency component from every measuring point are analyzed. It can be concluded that the reflective intensity below 100Hz is mainly from the wall of the train. In other spectrums, the contributions of the three points are similar.
|
|
Received: 29 August 2005
|
|
|
|
|
|
[1]明瑞森.声强技术[M].杭州:浙江大学出版社，1995.
[2]梁杰.S493柴油机噪声源识别与噪声控制[J].吉林工业大 学自然科学学报，2001,31(3):57-60.
[3]Johansson. Source Characterization of the Lower Front-End of a Disel Engine[J]. Applied Acoustics,1996,49(4):383-404.
[4]陈步达，王诗恩，周孔亢.车辆主要噪声源识别方法的研究 [J].机械工程学报，1997,33(6):77-80.
[5]Sakamoto Ichiro. Noise Source Identification on an Operating Vehicle by Acoustic Holography[J]. JSAE Review,1995,16(3): 325.
[6]刘岩.声强理论在高速铁道车辆噪声测试与分析中的应用 [J].铁道学报,2003,25(6):45-48.
|
|
|
|
2005, Vol. 22 
