|
|
|
| Research and Analysis of Japanese Steel Cantilever Support Structure Property |
| LIN De-fu，GU Xiao-dong，HAN Ling-qing |
| The Third Railway Survey and Design Institute Group Corporation, Tianjin 300251, China |
|
|
|
|
Abstract Research purposes: The aluminum alloy cantilever support structure are commonly used for the catenary system of the high-speed railway in China. It has many advantages，such as less weight，easy construction and needing no embalming after cutting, but its shortcomings are obvious, such as poor structure strength and poor resistance to chloride corrosion in coastal areas. As China is vast in territory and various in climate, in order to adapt to the various climate，it is necessary to seek the cantilever support structure of catenary system that can adapt to a variety of climatic characteristics. The Japanese steel cantilever support structure, much different from the common type cantilever, has its own advantages, so the research on its application in the catenary system in China has a notable effect on improving the reliability of the catenary system in Chinas coastal and strong wind regions.
Research conclusions: An analysis program was compiled for the Japanese steel cantilever structure with finite element method and ANSYS software. Combined with the standards and real project condition, the results of the static and modal analyses to the Japanese steel cantilever structure were studied. The result showed that the Japanese steel cantilever support structure had a lot of merits，such as the less deflection after loading and being uneasy to produce resonance due to the strong overall stability, and its static strength met the design requirements. So it has good applicable prospecting.
|
|
Received: 06 September 2012
|
|
|
|
|
|
[1] 于万聚.接触网设计及检测原理[M].北京：中国铁道出版社，1991. Yu Wanju. Theory of Catenary Design and Inspection [M]. Beijing: China Railway Publishing House, 1991.
[2] 于万聚.高速电气化铁路接触网[M].成都:西南交通大学出版社,2002. Yu Wanju. Ifigh Speed Electrified Railway Catenary [M]. Chengdu: Southwest Jiaotong University Publishing House, 2002.
[3] TB 10009—2005，铁路电力牵引供电设计规范[S]. TB 10009—2005，Design Code of Electric Traction Feeding [S].
[4] 吉鹏霄.接触网[M].北京:化学工业出版社，2006. Ji Pengxiao. Catenary [M]. Beijing: Chemical Industry Press, 2006.
[5] TB 10621—2009，高速铁路设计规范[S]. TB 10621—2009, Code for Design of High Speed Railway [S].
[6] TBT 2075—2010，电气化铁路接触网零部件[S]. TBT 2075—2010，Fittings for Overhead Contact System in Electrification Railway [S].
[7] 蔡成标，翟婉明.高速铁路接触网振动特性分析[J].西南交通大学学报，1997(5): 497-501. Cai Chenbiao，Zhai Wanming. Performances of Catenary of High-speed Railways [J]. Journal of Southwest Jiaotong University, 1997(5): 497-501.
[8] 梅桂明，张卫华.受电弓垂向动力学线性化模型及特性研究[J].铁道学报，2003(5): 16-20. Mei Guiming，Zhang Weihua. Linearmodel of vertical dynamics of Pantograph and Study on Characteristics [J]. Journal of the China Railway Society, 2003(5): 16-20.
[9] 刘怡，张卫华，梅桂明.受电弓/接触网垂向耦合运动中的接触网动应力研究[J].铁道学报， 2003(4): 23-26. Liu Yi, Zhang Weihua, Mei Guiming. Study of Dynamic Stress of the Catenary in the Pantograph/ Catenary Vertical Coupling Movement [J]. Journal of the China Railway Society, 2003(4): 23-26.
[10] 于正平.高速电气化铁路接触网-受电弓系统的研究[J].中国铁道科学，1999(1): 59-72. Yu Zhengping. A Study on High-speed Catenary -pantograph System [J]. China Railway Science，1999(1): 59-72.
[11] 张俊杰. 均匀接触网弹性及改善弓网取流质量的探讨[J].电气化铁道，2001(3): 24-25. Zhang Junjie. Current Collection Quality Caused by the Elastic of the Catenary [J]. Electrical Railway, 2001(3): 24-25.
[12] 杨岗.铁路接触网最优主动控制研究[J].铁道工程学报， 2012(3): 79-85. Yang Gang. Research on Opitimal Active Control of RaOway Catenary [J]. Journal of Railway Engineering Society, 2001(3): 24-25.
|
|
|
|
2013, Vol. 30 
