|
|
|
| Research on the Shear - lag Effect in Twin - cell PC Box - girder with Corrugated Steel Web |
| WEI Xing，YANG Shi – yu |
| (Southwest Jiaotong University，Chengdu，Sichuan 610031，China) |
|
|
|
|
Abstract Abstract : Research purposes ： Because of different rigidity distribution，shear - lag effects in PC box - girder with
corrugated steel web are different from that in PC box - girder. In order to investigate the shear - lag effects in twin - cell PC box girder With corrugated steel web，3 D finite element model of twin - cell PC box - girder With corrugated steel web was founded by means of ANSYS，and stress distributions on typical sections were obtained. Shear - lag effects of twin -
cell PC box - girder with corrugated steel web were investigated，which is compared with the ordinary PC box girder.
Seven geometric parameters affecting the shear - lag effect of box girder were analyzed.
Research conclusions： (1 ) Using corrugated steel web can enlarge the maximum shear lag coefficient of each section
slightly. (2) In term of the top flange，the shear - lag coefficient of the medium web is larger than that of both sides， contrary to the bottom plate. (3 )The width length ratio，the support length of the box - girder，and the thickness of the roof were confirmed as the main factor working on the shear - lag effect，and the shear lag was not influenced by the number of the diaphragms. (4)The research result are worthy of use for reference for design and analysis of PC box - girder with corrugated steel web.
|
|
Received: 18 October 2016
|
|
|
|
|
|
|
2017, Vol. 34 
