西安地铁隧道盾构开挖面支护力安全范围分析

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (613 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Research purposes: In combination with the tunnel engineering of Line 2 of Xi＇an，and according to the specific geological conditions，the FLAC3D numerical simulation software was used to determine the safety range of the supporting force on the excavation face during the tunnelling，taking the settlements of the ground above the excavation face and the tunnel top as the measuring standard，for the purpose of avoiding the over settlement and rising of the ground when the tunnel passed through the place with big variation of the buried depth．

Research conclusions: ( 1 ) The excavation face of shield tunnel has its minimum supporting force and maximum supporting force． It means that the supporting force has a reasonable safely range． When the supporting force is out of range，the soil around the tunnel is easy to be damaged，or the over settlement or over rising appears to the ground surface when the tunnel is shallow． ( 2) When the tunnel buried depth is bigger than 1． 5 times of the tunnel diameter，the surface point can not effectively reflect the deformation of soil around the tunnel，and at this time，the soil deformation should be monitored and controlled by the monitoring spots in the tunnel． ( 3) The safely range of supporting force increases with the increase of the tunnel depth． When the tunnel is shallow， the safely range of supporting force is very small，and at this time，the heap loading on the ground should be used to increase the tunnel buried depth equivalently for increasing the supporting safely range and reducing the construction difficulty．

Key words： shield tunnel FLAC3D supporting force safety range

Received: 17 November 2011

PACS:

U45

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YAN Zhi － guo
	LI Yue

Cite this article:

YAN Zhi － guo,LI Yue. Analysis of Safety Range of Supporting Force on Excavation Face of Tunneling Shield for Xi＇an Metro[J]. 铁道工程学报, 2012, 29(7): 82-86.

URL:

http://tdgcxb.crec.cn/EN/ OR http://tdgcxb.crec.cn/EN/Y2012/V29/I7/82

［1］张义同，高健，等．隧道盾构掘进土力学( 国家“973”项目研究成果) ［M］．天津: 天津大学出版社， 2010．

Zhang Yitong，Gao Jian，etc． Soil Mechanics on Shield Tunnelling［M］． Tianjin: Tianjin University Press， 2010．

［2］李团社．西安地铁穿越地裂缝带线路与轨道工程方案研究［J］．铁道工程学报， 2009( 12) : 81 － 85．

Li Tuanshe． Study on the Project Plans of the Xi’an Subway Passing through the Earth Surface Crack Zone［J］． Journal of Railway Engineering Society， 2009( 12) :81 － 85．

［3］任建喜，张引合，高丙丽，等．浅埋暗挖地铁隧道施工方案FLAC 优化分析［J］．西安科技大学学报，2011( 2) :157 － 162．

Ren Jianxi，Zhang Yinhe，Gao Bingli，etc． Optimization Analysis on Subway Tunnel Construction Plan by Shallow Dark Excavation Method with FLAC［J］． Xi’an University of Science and Technology，2011( 2) : 157 －162．

［4］姜忻良，赵志民，李园．天津地铁盾构施工对邻近工程设施影响的动态模拟［J］．天津大学学报，2006( 2) : 188 －193．

Jiang Xinliang， Zhao Zhimin， Li Yuan． Dynamic Simulation of the Effects of Shield Tunneling in Tianjin Subway Projection Neighboring Job Facilities ［J］．Journal of Tianjin University，2006( 2) : 188 － 193．

［5］胡庆安，夏永旭，王文正．双连拱隧道施工过程的三维数值模拟［J］．长安大学学报( 自然科学版) ，2005( 1) : 48 － 51．

Hu Qingan， Xia Yongxu， Wang Wenzheng． 3D Numerical Simulation on Double － arch Tunnel’s Construction Process ［J］． Journal of Chang’an University( Natural Science Edition) ，2005( 1) : 48 － 51．

［6］王铁男，郝哲． FLAC 在地铁隧道数值模拟中的应用［J］．沈阳大学学报，2010( 1) : 11 － 14．

Wang Tienan，Hao Zhe． Application of FLAC in Numerical Simulation of Subway Tunnel ［J］． Journal of Shenyang University，2010( 1) : 11 － 14．