摩擦型多排高强度螺栓连接分析

徐海鹰

铁道工程学报 ›› 2011, Vol. 28 ›› Issue (11) : 67-71.

PDF(1021 KB)
PDF(1021 KB)
铁道工程学报 ›› 2011, Vol. 28 ›› Issue (11) : 67-71.
路网研究

摩擦型多排高强度螺栓连接分析

  • 徐海鹰
作者信息 +

Study on Connection of Friction - typed Multiple - row High - strength Bolt

  • XU Hai - ying
Author information +
文章历史 +

摘要

研究目的:为了明确摩擦型多排高强度螺栓连接传力性能、接头折减系数和极限状态,通过模型试验、接触单元有限元计算和理论分析进行相关的研究。
研究结论:研究结果表明: 摩擦型多排高强度螺栓连接各栓传力特性取决于外荷载、接触面状况、等效截面刚度等因素,多排螺栓连接的承载能力极限状态以首尾两排螺栓处芯板与拼接板接触面上滑移量达螺栓与栓孔间的设计空隙值、头排螺栓承剪孔壁承压作为判定指标; 长列摩擦型高强度螺栓接头头尾排螺栓传力比最大; 实桥栓接节点极限承载力满足设计要求。

Abstract

Research purposes: In order to clarify the connection transmission performance,the joint reduction factor and the limit condition of the friction - type multiple - row bolt,the relative study was done by doing the model test and making the finite element calculation and theoretical analysis for contact element.
Research conclusions: The results showed that the connection transfer force characteristics of the friction - typed multiple - row bolt depended on the external load,the contact surface condition and the equivalent cross - section stiffness. The slippage between the core plate at the front and end rows bolts and the contact surface of the splicer,the design gap value between the bolt and keyhole and the load bearing capacity of the shear - loaded hole wall were considered as the criterion for the limit condition of the load bearing capacity of the connection of the multiple - row bolt.The force transmission ratio of of the joint bolts on the front and rows of long - row friction - typed high - strength bolt was the biggest. The limit load bearing capacity of the node of real bridge met the design requirement.

关键词

高强度螺栓连接 / 摩擦 / 传力性能 / 折减系数 / 极限状态

Key words

high - strength bolt connection / friction / transmission performance / reduction factor / limit condition

引用本文

导出引用
徐海鹰. 摩擦型多排高强度螺栓连接分析[J]. 铁道工程学报, 2011, 28(11): 67-71
XU Hai - ying. Study on Connection of Friction - typed Multiple - row High - strength Bolt[J]. Journal of Railway Engineering Society, 2011, 28(11): 67-71
中图分类号: TU391   

参考文献

[1] 铁道部大桥工程局. 九江长江大桥技术总结[J]. 武汉:武汉测绘科技大学出版社, 1996.
Ministry of Railways Bridge Engineering Bureau.Jiujiang Yangtze River Bridge Technical Summary[J].Wuhan: Wuhan University of Surveying and Mapping Press, 1996.
[2] 党志杰. 铁道部大桥局桥研所. 摩擦型长列螺栓接头研究[J]. 桥梁建设,1993( 1) : 52 - 57.
Dang zhijie. Ministry of Railways Bridge Research Institute. Long - column of Friction - typed Bolted Connection Research[J]. Bridge constraction,1993( 1) : 52 - 57.
[3] TB 10002. 2—2005,铁路桥梁钢结构设计规范[S].
TB 10002. 2—2005,Code for Design on Steel Structure of Railway Bridge[S].
[4] 英国标准协会. BS5400,钢桥、混凝土桥及结合桥[M]. 成都: 西南交通大学出版社, 1987.
British Standard. BS5400, Steel, Concrete and Composite Bridges[M]. Chengdu: Southwest Jiaotong University Press, 1987.
[5] 张晔芝,侯文崎,叶梅新. 摩擦型高强度螺栓长接头螺栓传力比研究[J]. 长沙铁道学院学报,2000( 4) : 6 - 10.
Zhang Huazhi,Hou Wenqi,Ye Meixin. Friction Bolt Bolt Connector Length of the Force Transmission Ratio [J]. Changsha Railway University,2000( 4) : 6 - 10.
[6] TBJ 214—92,铁路钢桥高强度螺栓连接施工规定[S].
TBJ 214—92,Railway Steel Bridge High Strength Bolted Connection Construction Provision[S].
[7] JGJ 82—91,钢结构高强度螺栓连接的设计、施工及验收规程[S].
JGJ 82—91,Steel Construction High Strength Bolts Connection Design, Construction and Inspection Procedures[S].
[8] GB 50017—2003,钢结构设计规范[S].
GB 50017—2003,Code for Design of Steel Structures [S].
[9] 马场贤三著. 刘呈秀,陈开利译. 大直径多排螺栓摩擦接头试验[J]. 国外桥梁, 1987( 4) : 55 - 56.
Ma Chang - xian - san. Liu Chengxiu,Chen Kaili,translate. Large - diameter Multi - row Bolt Friction Joint Test[J]. Foreign Bridges, 1987( 4) : 55 - 56.
[10] 高宗余,方秦汉,卫军. 中国铁路桥梁技术发展与展望[J]. 铁道工程学报, 2007( 1) : 55 - 59.
Gao Zongyu,Fang Qinhan,Wei Jun. Technology Development and Prospects of China Railway Bridge[J]. Journal of Railway Engineering Society, 2007( 1) :55 - 59.
 

PDF(1021 KB)

2883

Accesses

0

Citation

Detail

段落导航
相关文章

/