Auto CAD二次开发在铁路桥墩设计中的应用

摘要
图/表
参考文献
相关文章 (5)

全文: PDF (1776 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要研究目的：特殊桥墩的设计在铁路设计中越来越多，而目前尚无专门的铁路桥墩设计的商业软件，为了帮助设计人员从大量烦琐的绘图和计算工作中解脱出来，为此开展开发可以设计计算和绘图一体的铁路桥墩设计绘图参数化平台系统研究。本文采用组件化设计，基于VC7.0平台的C++语言和用Object ARX提供的封装类对AutoCAD进行二次开发，研发铁路桥梁桥墩设计参数化平台系统。

研究结论：(1)研发的铁路桥梁桥墩设计参数化平台系统实现了自动输出桥墩构造图、桥墩顶帽及垫石钢筋图和桥墩墩身钢筋图的功能；(2)该系统实现了铁路桥梁桥墩的参数化设计，可切实提高设计效率，减少设计中的人为失误，提高工作效率；(3)以连续梁桥边墩设计为例，验证了系统的可靠性，结果表明该铁路桥墩设计软件的性能是可靠的。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	徐贤德

关键词 ：铁路桥墩, AutoCAD, 二次开发, 设计绘图

Abstract：Research purposes: The demand for the special design of railway bridge piers is increasing. And the commercial software of railway bridge pier design does not exist by far. In order to help design personnel free from a mass of tedious drawing and calculation work, study on the parametric design platform system of the railway bridge pier which can do drawing and calculation work is carried out. In this paper, with the modular design, based on the VC7.0 platform with C++ language and Object ARX managed wrapper class, the design platform system of railway bridge pier based on AutoCAD secondary development is developed.

Research conclusions: (1)This software system has realized automatic output the design drawing of pier structural, pier cap, pier shaft, pier cap reinforcement and foundation. (2)This software system realized railway bridge pier's parametric design. So this software system can effectively improve design efficiency and reduce man-made error in the design and improve the work efficiency. (3)Taking the side pier design in the continuous girder bridge as the example, it is verified with regards to the reliability of the software. The results show that the parametric platform system is reliable.

Key words： railway bridge pier AutoCAD secondary development design and drawing

收稿日期: 2013-08-27

PACS:

U446.2

作者简介: 徐贤德，男，1984年出生，工程师。

引用本文:

徐贤德. Auto CAD二次开发在铁路桥墩设计中的应用[J]. 铁道工程学报, 2014, 31(2): 56-60.
XU Xian-de. Application of Auto CAD Secondary Development in Railway Bridge Pier Design. 铁道工程学报, 2014, 31(2): 56-60.

链接本文:

http://tdgcxb.crec.cn/CN/ 或 http://tdgcxb.crec.cn/CN/Y2014/V31/I2/56

[1] 唐净皓. 基于Auto CAD二次开发的水池结构设计软件探讨 [J]. 特种结构, 2012(6):117120.

Tang Zhenghao. Discussion of Pound Structure Design Software Development Based on Auto CAD Secondary Development [J]. Special Structure, 2012(6):117-120.

[2] 彭卫兵, 等. 桥梁CAD设计软件研究进展与展望 [J]. 浙江工业大学学报, 2009(5):567-571.

Peng Weibing, etc. Research Progress and Prospect of CAD Software in Bridge Engineering[J]. Journal of Zhejiang University of Technology, 2009(5):567-571.

[3] 张晋西. Visual Basic. NET二次开发AutoCAD范例精解 [M]. 北京:清华大学出版社, 2004.

Zhang Jinxi. Visual Basic. NET Essence of Secondary Development of AutoCAD Sample Solution [M]. Beijing: Tsinghua University Press, 2004.

[4] CharlesMcAuley. AutoCAD2000 ObjectARX编程指南 [M]. 北京: 机械工业出版社, 2000.

CharlesMcAuley. AutoCAD2000 ObjectARX Programming Guide [M]. Beijing: Mechanical Industry Press, 2000.

[5] 李长勋. AutoCAD ObjectARX程序开发技术 [M]. 北京:国防工业出版社, 2005.

Li Changxun. AutoCAD ObjectARX Application Development Technology [M]. Beijing: National Defence Industry Press, 2005.

[6] 邵俊昌, 李旭东. AutoCAD ObjectARX 200 开发技术指南 [M]. 北京: 电子工业出版社, 2000.

Shao Junchang, Li Xudong. AutoCAD ObjectARX 2000 Development Technology Guide [M]. Beijing: Electronic Industry Press, 2000.

[7] 刘希宏, 程辛卯. 基于ARX的铁路涵洞CAD的开发探讨 [J]. 铁道工程学报, 2004(3):53-55.

Liu Xihong, Cheng Xinmao. Development and Research of the Culvert CAD in Railway Based on ARX [J]. Journal of Railway Engineering Society, 2004(3): 53-55.

[8] 董续凡, 等. 铁路涵洞CAD系统的研制 [J]. 铁道工程学报, 1999(4):66-69.

Dong Xufan, etc. Development on CAD System for Railway Culvert [J]. Journal of Railway Engjneering Society, 1999(4):66-69.

[9] 柳忠杰. 铁路路基通用CAD系统 [J]. 铁道工程学报, 2001(3):34-37.

Liu Zhongjie. Railway Subgrade General CAD System [J]. Journal of Railway Engineering Society, 2001(3):34-37.

[10] 王卫东, 张怡, 詹振炎. 应用ObjectARX技术自动设计铁路一般路基横断面 [J]. 长沙铁道学院学报, 2000(4):11-14.

Wang Weidong, Zhang Yi, Zhan Zhenyan. Application of ObjectARX in Computer-adied Design of Railway Cross Section [J]. Journal of Changsha Railway University, 2000(4):11-14.