粗糙度对超长嵌岩桩承载特性影响的研究

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (725 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要研究目的:为探讨粗糙度对超长嵌岩桩承载特性的影响，对武汉市某大桥的桩基工程，运用有限元方法分析了不同桩侧粗糙程度下，桩基沉降量、桩侧摩擦力分布和桩身轴力分布情况，并与室内模型试验所得出的结果进行对比分析。

研究结论:(1)桩侧越粗糙，桩侧摩擦力越容易发挥，桩侧摩擦力越大，相同竖向荷载作用下的桩顶沉降量越小;(2)桩顶荷载传递至周围岩土层的速率越快，传递同等水平的竖向荷载所需的传递深度越小;(3)粗糙度对桩端荷载分担比例的影响不大:(4)本研究结论可为嵌岩桩工程的设计、施工提供-定的借鉴。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	昌钰
	丁洪元
	陈斌

关键词 ：粗糙度, 嵌岩桩, 有限元, 承载特性, 室内模型试验

Abstract：Research purposes: Based on the pile foundations of a bridge in Wuhan City，the finite element method is used to study pile settlement，pile side friction distribution and axial force distribution with different pile side roughness. Then combined with the laboratory model test results，explored the roughness on the bearing characteristics of super-long rock-socketed piles.

Research conclusions: The results shows that the pile side friction is easier to play as the surface of pile is rougher, for this reason the pile side friction get bigger and the pile settlement become smaller. In the same time，the rate of transfer load on pile top to the surrounding rock and soil is faster，and the depth of transfer the same level of vertical load become smaller. However, the roughness does not much affect the load proportion of pile tip. The conclusions can provide a reference for design and construction of super-long rock-socketed pile.

Key words： roughness rock-socketed pile finite element bearing characteristic laboratory model tests

收稿日期: 2013-05-31

PACS:

TU473

作者简介: 昌钰,1970年出生，男，高级工程师

引用本文:

昌钰,丁洪元,陈斌. 粗糙度对超长嵌岩桩承载特性影响的研究[J]. 铁道工程学报, 2013, 30(11): 27-31.
CHANG Yu，DING Hong-yuan，CHEN Bin. Influence of Roughness on Bearing Characteristic of Super- long Rock - socketed Pile. 铁道工程学报, 2013, 30(11): 27-31.

链接本文:

http://tdgcxb.crec.cn/CN/ 或 http://tdgcxb.crec.cn/CN/Y2013/V30/I11/27

[1]刘利民.增加孔壁粗糙度提高钻孔灌注桩承载力的原理及施工措施[J].建筑技术，2002 ( 3 ) :188-189.

Liu Limin. Enhancing the Bearing Capacity of Bored Pile by Improving Roughness of the Hole[J]. Architecture Technology , 2002 ( 3 ) :188-189.

[2]王雁然，潘家军.嵌岩桩竖向荷载 - 沉降特性的有限元分析[J].武汉大学学报(工学版),2006(5):46-52.

Wang Yanran, Pan Jiajun. Finite Element Analysis of Vertical Load-settement Characters of Rock- socketed Piles[J].Engineering Journal of Wuhan University, 2006(5):46-52.

[3]Pens P J N, Rowe R K, Turner R M. An experimental investigation into side shear for socketed piles in sandstone[C]// Proceedings of the International Conference on Structural Foundations on Rock, Sydney. 1980(1):291-302.

[4]Horvath R G，Kenny T C, Kozichi P. Method of improving the performance of drilled piers in weak rock[J].Canadian Geotechnical Journal, 1983，20 (4):758-772.

[5]张建新，吴东云，杨宝珠.不同桩侧粗糙度下桩侧阻力分析[J].辽宁工程技术大学学报(自然科学版)，2008 (1):57-59.

Zhang Jianxin, Wu Dongyun, Yang Baozhu. Analysis of Effects of Hole Side Roughness on Pile Side Resistance[J].Journal of Liaoning Technical University( Natural Science)，2008 (1):57-59.

[6]龚成中，龚维明，何春林，等.孔壁粗糙度对深嵌岩桩承载特性的影响[J].中国公路学报，2011(2): 56-61.

Gong Chengzhong, Gong Weiming, He Chunlin, etc. Influence of Hole Side Roughness on Bearing Characteristic of Deep Rock-socketed Pile[J].China Journal of Highway and Transport, 2011( 2 ) : 56-61.

[7]孙树礼.大直径超长钻孔灌注桩承载特性试验研究[J]. 铁道工程学报，2011(10 ) : 66-71.

Sun Shuli. Research on Bearing Characteristics of Large-diameter and Overlength Bored Pile[J]. Journal of Railway Engineering Society , 2011(10 ) : 66- 71.