盾构隧道管片施工力学性能三维数值模拟研究

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1010 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要研究目的：施工阶段的管片外部荷载系统和力学性能与正常使用阶段相比均表现出较大差异，大量工程经验表明，管片在施工阶段破损的概率要远远高于正常使用阶段。本文通过建立考虑环、纵向接头不连续性的三维盾构隧道有限元模型，针对注浆压力、千斤顶推力以及拼装方式三个施工要素进行研究，拟为盾构施工提供合理的意见。

研究结论：分析结果表明，在施工阶段，由于管片外部荷载沿隧道纵向有差异且接头存在非连续性，管片的力学性能沿隧道纵向存在较大差异，各环变形特征也不尽相同，与传统均值连续模型相比亦存在较大差异，注浆压力、千斤顶推力对施工阶段管片力学性能有较大影响，管片在错缝、通缝拼装条件下表现的力学性能存在较大差异，综合来看，错缝拼装结构相比通缝拼装具有更好的结构整体刚度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张鹏

关键词 ：盾构隧道, 管片, 施工阶段, 数值模拟

Abstract：Research purposes:The external load system and mechanical properties of segment during construction are big different from the normal use． A large number of engineering experiences have shown that the damaged probability of segment during construction is much higher than that during normal use． This paper researches the key elements of the grouting pressure，jacking force and assembling way during construction with the FEM three － dimensional model for the shield tunnel to provide the reference to the similar works．

Research conclusions: The analysis results show that the segment＇s mechanical properties along the vertical direction of the tunnel are big different，and the deformation features of each cirque are not the same and big different from that obtained by the conventional mean value continuous model due to the differences of the external load of the segment along the longitudinal direction of the tunnel and the non － continuity of the joint． The grouting pressure and jacking force have apparent effects on the mechanical properties of segment，and the mechanical properties of segment in staggered joint are quite different from the straight joint．Moreover，the staggered joint structure is better than straight joint in the overall stiffness．

Key words： shield tunnel segment construction stage numerical simulation

收稿日期: 2012-03-31

PACS:

U451

作者简介: 张鹏，1987 年出生，男，助理工程师

引用本文:

张鹏. 盾构隧道管片施工力学性能三维数值模拟研究[J]. 铁道工程学报, 2012, 29(10): 63-69.
ZHANG Peng. Research on Mechanical Property of Segment of Shield Tunnel During Construction with Three － dimensional Numerical Simulation. 铁道工程学报, 2012, 29(10): 63-69.

链接本文:

http://tdgcxb.crec.cn/CN/ 或 http://tdgcxb.crec.cn/CN/Y2012/V29/I10/63

［1］朱伟，陈仁俊．盾构隧道技术问题和施工管理［J］．岩土工程界，2001( 12) :14－16．

Zhu Wei，Chen Renjun．Shield Tunneling Technology and Construction Management［J ］．Geotechnical Engineering，2001(12) : 14－16．

［2］朱伟，译．日本土木学会隧道标准规范( 盾构篇) 及解说［M］．北京: 中国建筑工业出版社，2001．

Zhu Wei，Translation．Japan Civil Society Tunnel Standards ( shield article ) and Commentary［M］． Beijing: China Architecture ＆ Building Press，2001．

［3］王树理．地下建筑结构设计［M］．北京: 清华大学出版社， 2007．

Wang Shuli．The Underground Structure Design［M］． Beijing: Tsinghua University Press，2007．

［4］胡如军，朱伟，谈小龙．盾构隧道管片的设计计算方法［J］．河海大学学报，2001(12) :82－85．

Hu Rujun，Zhu Wei，Tan Xiaolong．The Design of Shield Tunnel Segment Lining Calculation Method ［J］． Journal of Hehai University，2001(12) : 82－85．

［5］GB 50157—2003，地铁设计规范［S］．

GB 50157—2003，Code for Design of Metro［S］．

［6］郭玉海，陈丹，袁大军．北京地铁盾构隧道管片设计合理性探讨［J］．市政技术，2006(4) :244－247．

Guo Yuhai，Chen Dan，Yun Dajun．Beijing Subway Shield Tunnel Segments Rationality Discusses Design ［J］．Municipal Technology，2006(4) :244－247．

［7］彭柳松．关于城市地铁盾构管片结构设计的思考［J］．隧道建设，2005(1) :23－26．

Peng Liusong．Thinking About the Design of Urban Subway Shield Segment［J］．Tunnel Construction，2005 (1) :23－26．

［8］Yukinori Koyama．Present Status and Technology of Shield Tunneling Method in Japan［J］．Tunneling and Underground Space Technology ，2003(18) : 145－149．

［9］陈俊生，莫海鸿．盾构隧道管片施工阶段力学行为的三维有限元分析［J］．岩土力学与工程学报，2006(2) :3482 － 3488．

Chen Junsheng，Mo Haihong．Three － Dimensional Finite Element Analysis of Mechanical Behaviors of Shield Tunnel Segment During Construction［J］． Chinese Journal of Rock Mechanics and Engineering， 2006( 2) : 3482－3488．

［10］张志强，何川，佘才高．南京地铁盾构掘进施工的三维有限元仿真分析［J］．铁道学报，2005(1) :84－89．

Zhang Zhiqiang，He Chuan，She Caigao．Three Dimensional Finite Element Modeling of Excavation and Advancement Processes of Shield Tunnel Construction in Nanjing Metro［J］．Journal of the China Railway Society，2005(1) : 84－89．

［11］张海波，殷宗泽，朱俊高，等．盾构法隧道衬砌施工阶段受力特性的三维有限元模拟［J］．岩土力学，2005(6) : 990－994．

Zhang Haibo，Yin Zongze，Zhu Junguo，etc．Three Dimensional FEM simulation of Shield － driven Tunnel Lining During Construction Stage ［J］．Rock and Mechanics，2005(6) : 990－994．

［12］宋克志，袁大军，王梦恕．盾构法隧道施工阶段管片的力学分析［J］．岩土力学，2008(3) :619－623．

Song Kezhi，Yuan Dajun，Wang Mengshu． Segmental Mechanical Analysis of Shield Tunnel During Construction Stage ［J］．Rock and Mechanics，2008 (3) :619－623．

［13］石立成，杜守继，张强．盾构通缝拼装隧道纵向错台的数值模拟分析［J］．石家庄铁道学院学报( 自然科学版) ， 2007( 3) : 37－40．

Shi Licheng，Du Shouji，Zhang Qiang．Numerical Simulation Analysis on Longitudinal Dislocation for Shield Tunnel with Straight Joint ［J］．Journal of Shijiazhuang Railway Institute (Natural Science) ，2007 (3) :37－40．

［14］孙文昊，焦齐柱，兰宇．盾构管片接头抗弯刚度影响因素研究［J］．铁道工程学报，2008(3) :66－71．

Sun Wenhao，Jiao Qizhu，Lan Yu．Research on the Factors Influencing Flexural Rigidity of Duct Piece Joint of Shield Tunnel［J］．Journal of Railway Engineering Society，2008(3) : 66－71．