高锰钢辙叉与钢轨的焊接

徐安友

铁道工程学报 ›› 2003, Vol. 20 ›› Issue (3) : 86-89.

PDF(187 KB)
PDF(187 KB)
铁道工程学报 ›› 2003, Vol. 20 ›› Issue (3) : 86-89.
路网研究

高锰钢辙叉与钢轨的焊接

  • 徐安友
作者信息 +

WELDING OF HIGH MANGANESE STEEL FROGS WITH RAILS

  • XU An-you
Author information +
文章历史 +

摘要

本文介绍了高锰钢辙叉和钢轨间加入中间过渡材料进行的闪光接触焊。焊接后的高锰钢热影响区奥氏体组织未有析出晶界碳化物,钢轨热影响区没有马氏体组织产生。焊接接头具有良好的焊接性能。该技术已应用在高锰钢焊接辙叉上。

Abstract

Medium material is used for the flash about welding of high manganese steel frogs to rails. No separated carbide is generated from the austenite microstructure in heat affected zone on high manganese steel frogs, nor martensite microstructure appears in the heat affected zone on rails. Excellent weldability is realized at the welding joints. This technology is employed in the welding of high manganese steel frogs.

关键词

高锰钢 / 钢轨 / 焊接

Key words

high Manganese steel / rail / welding

引用本文

导出引用
徐安友. 高锰钢辙叉与钢轨的焊接[J]. 铁道工程学报, 2003, 20(3): 86-89
XU An-you. WELDING OF HIGH MANGANESE STEEL FROGS WITH RAILS[J]. Journal of Railway Engineering Society, 2003, 20(3): 86-89
中图分类号: U213.92   

PDF(187 KB)

2919

Accesses

0

Citation

Detail

段落导航
相关文章

/