关于900 t铁路架桥机钢结构焊接工艺采用标准的探讨

王建军,房会彬

铁道工程学报 ›› 2005, Vol. 22 ›› Issue (4) : 43-46.

铁道工程学报 ›› 2005, Vol. 22 ›› Issue (4) : 43-46.

关于900 t铁路架桥机钢结构焊接工艺采用标准的探讨

  • 王建军,房会彬
作者信息 +

EXPLORATION ON WELDING TECHNOLOGICAL STANDARD FOR STEEL STRUCTURE OF 900 T RAILWAY BRIDGE GIRDER ERECTING MACHINE

  • WANG Jian-jun, FANG Hui-bin
Author information +
文章历史 +

摘要

900 t铁路架桥机是高速铁路及客运专线桥梁建设中使用的关键设备。目前,国内在铁路架桥机钢结构的 制造及焊接工艺方面,还没有专门的规范或规程。通过对几种国家和行业规范或规程焊接工艺标准的对比、分 析,对900 t铁路架桥机钢结构的焊接工艺提出一些参考性意见。

Abstract

900 t railway bridge girder erecting machine is a key equipment for construction of high -speed railway and passenger dedicated line. At present, there is not special technological criterion or specification in China for manufacturing and welding steel structure of railway bridge girder erecting machine. The reference ideas are presented in this paper on welding technology for 900 t railway bridge girder erecting machine through comparison and analysis of several state and trade technological critorions and standards.

关键词

铁路架桥机 / 焊接工艺 / 对比分析

Key words

railway bridge girder erecting machine / Welding technology / comparison and analysis

引用本文

导出引用
王建军, 房会彬. 关于900 t铁路架桥机钢结构焊接工艺采用标准的探讨[J]. 铁道工程学报, 2005, 22(4): 43-46
WANG Jian-jun, FANG Hui-bin. EXPLORATION ON WELDING TECHNOLOGICAL STANDARD FOR STEEL STRUCTURE OF 900 T RAILWAY BRIDGE GIRDER ERECTING MACHINE[J]. Journal of Railway Engineering Society, 2005, 22(4): 43-46
中图分类号: U445   

参考文献

[1] GB 50017—2003,钢结构设计规范[S].北京:中国计划出版社, 2003.
[2] GB 50205—2001,钢结构工程施工质量验收规范[S].北京:中国 计划出版社,2001.
[3] JGJ81—2002,建筑钢结构焊接技术规程[S].北京:中国建筑工 业出版社,2002.
[4] TB10002.2—99,铁路桥梁钢结构设计规范[S].北京:中国铁道 出版社,2000.
[5]TB 10212—98,铁路钢桥制造规范[S].北京:中国铁道出版社, 1999.
[6] GB 3811—83,起重机设计规范[S].北京:中国标准出版社,2002.
[7] JG/T 5112—1999,塔式起重机钢结构制造与检验[S].北京:中 国标准出版社,2002.
[8] GB/T 6963—93,钢制件熔化焊工艺评定[S].北京:中国标准出版 社,2001.

Accesses

Citation

Detail

段落导航
相关文章

/