Study on Design of the First LIM Inspection and Repair Line for Wheel-sets

WANG Xin

Journal of Railway Engineering Society ›› 2008, Vol. 25 ›› Issue (4) : 91-93.

PDF(300 KB)
PDF(300 KB)
Journal of Railway Engineering Society ›› 2008, Vol. 25 ›› Issue (4) : 91-93.

Study on Design of the First LIM Inspection and Repair Line for Wheel-sets

  • WANG Xin
Author information +
History +

Abstract

Research purposes: The introduction is given in this paper to the design of inspection and repair line for wheel-sets on linear motor vehicle major repair base, the study is done on the design of inspection and repair line for wheel-sets of linear motor vehicle, and the new thoughts about flexible and informationalized design of inspection and repair line for wheel-sets are presented.
Research conclusions: The un-wheeling repair and heavy repair of wheel-sets of linear motor vehicle will be done on two production lines separately and the flexible and information design of inspection and repair line for wheel-sets is adopted to meet the requirement of other vehicles for heavy repair of wheel-sets.

Key words

linear motor / wheel-sets / inspection and repair line

Cite this article

Download Citations
WANG Xin. Study on Design of the First LIM Inspection and Repair Line for Wheel-sets[J]. Journal of Railway Engineering Society, 2008, 25(4): 91-93

References

[1] TB/T 1718,铁道车辆轮对组装技术条件[S].
[2] GB 50157-2003,地铁设计规范[S].
[3] 中铁二院工程集团有限责任公司.广州市轨道交通五号 线工程施工图设计车辆段与综合基地工艺设计文件 [Z].成都:中铁二院工程集团有限责任公司,2007.
PDF(300 KB)

3010

Accesses

0

Citation

Detail

Sections
Recommended

/