梯形槽梁空间力学性能分析的理论解法

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (558 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Research purposes: In this paper, the shear deformation and shear lag effect are considered comprehensively, and especially the self-equilibrium conditions for the shear lag warping stress and bending moment are introduced. Then the analytical solution of the vertical bending of trapezoidal U-shaped girder is obtained based on the energy variation method, the spatial mechanical behavior of U-shaped girder is studied in detail. And the validity of the analytical solution of this paper is verified by comparing with the numerical solution of finite element.
Research conclusions:(1) Relative to the neutral axis(x-axis), since the transverse asymmetry of trapezoidal U-shaped girder is prominent, so commonly used traditional shear lag theory is difficult to truly reflect the mechanical mechanism of this kind of structure without the introduction of self-equilibrium conditions about shear warping stress and bending moment. (2) Compared with the commonly used traditional shear-lag theory, the shear lag effect of U-shaped girder has no coupling relationship with the elementary beam theory, and its calculation accuracy is significantly improved. (3) The shear lag effect not only affects the normal stress of the bottom slab of U-shaped girders, but also on its web, which cannot be ignored. (4) If the cross-sectional dimensions of U-shaped girder is determined, its shear lag stress contribution to web and bottom slab is not affected by the span. (5) The method in this paper is a guide for the design of trapezoidal U-shaped reinforcement and prestressing tendons, and this in turn will improve its durability.

Key words： trapezoidal U-shaped girder self-equilibrium condition shear lag effect energy variation method

Received: 12 July 2021

PACS:

U448.22

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Genhui
	GAN Ziyu

Cite this article:

WANG Genhui,GAN Ziyu. Theoretical Solution on Spatial Mechanical Properties of Trapezoidal U-shaped Girders[J]. Journal of Railway Engineering Society, 2022, 39(9): 38-43.

URL:

https://tdgcxb.crec.cn/EN/ OR https://tdgcxb.crec.cn/EN/Y2022/V39/I9/38

[1]	黄侨,陈卓异,杨明.槽型梁桥力学性能的研究现状与展望[J].中外公路,2013(6):131-135.Huang Qiao, Chen Zhuoyi, Yang Ming. Groove Mechanical Properties Research Status and Prospects Beam Bridge [J].Journal of China & Foreign Highway,2013(6): 131-135.
[2]	Xun Z, Xiaozhen L. Dynamic Characteristics Study of U-beam Applied in Rail Transit [J].Advanced Materials Research,2011(5):243-249.
[3]	刘小娟,张洪军,冯飒.新南干渠渡槽结构应力变形三维有限元分析[J].工程建设, 2021(4):32-37.Liu Xiaojuan, Zhang Hongjun, Feng Sa.Three-dimensional Finite Element Analysis of Stress and Deformation of an Aqueduct Structure in New South Main Canal [J].Engineering Construction, 2021(4):32-37.
[4]	韩江龙,吴定俊,李奇.城市轨道交通槽型梁结构噪声计算与分析[J].工程力学,2013(2):190-195.Han Jianglong, Wu Dingjun, Li Qi.Calculation and Analysis of Structure-borne Noise from Urban Rail Transit Girders[J].Engineering Mechanics,2013(2):190-195.
[5]	王起才,薛彦瑾,张戎令,等.高速铁路无砟轨道简支槽型梁静载弯曲试验研究[J].西安建筑科技大学学报:自然科学版,2016(4):463-476.Wang Qicai, Xue Yanjin, Zhang Rongling, etc. Static Load Bending Experimental Study on Simply Supported Groove Beam of Ballastless Track of High-speed Railway [J]. Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2016(4):463-476.
[6]	胡匡璋,江新元,陆光闾.槽形梁[M].北京:中国铁道出版社,1987.Hu Kuangzhang, Jiang Xinyuan, Lu Guanglv. Trough Girder[M]. Beijing: China Railway Publishing House, 1987.
[7]	段敬民,钱永久.槽形截面梁静力学特性的研究[J].工程力学,2010(9):128-132.Duan Jingmin, Qian Yongjiu. Study on Static Characteristics of U-shape Beams[J].Engineering Mechanics,2010(9):128-132.
[8]	D. F. Wisniewski, Cruz. Ave River Bridge –A Major Precast Prestressed Concrete U-Girder Bridge in Portugal [J].PCI Journal, 2004(4):72-86.