|
|
|
| Determination of Divergence Tolerance of Elevation and Altitude Difference between Aajoining Points of High Speed Railway with CPIII Network |
| XU Xiao—zuo |
| South west University of Science and Technology, Mianyang, Sichuan 310007,China |
|
|
|
|
Abstract Research purposes: CPⅢvertical control network plays an important role in ensuring the vertical static regularity of the ballastless track of hish—speed railway．It以en needs repeated measurement in order to assure the reliability of the measurement results．However，the divergence tolerance of elevation and altitude difference between adjoining points of high—speed railway with CPIII is generally determined on the basis of large amount of statistic data，other than rigorous theoretic derivation．So the research on principle of rigorous estimation of divergence tolerance of elevation and altitude difference between adjoining points of high—speed railway with CPIII is significant to assuring establishment of CPIII vertical control network and reliability of the measured data for hish—-speed railway．
Research conclusions: According to the principle of the square difference，the model for the divergence tolerance of elevation and altitude difference between adjoining points of hish—-speed railway with CP III Was derived．And with this model．the simulated calculation Was done for the analogue CPⅢvertical control network measured with German surveying method and China rectangle surveying method and its result Was consistent with the specification of divergence tolerance of elevation and altitude difference between adjoining points of hish—speed railway with CPIII stipulated in the current code for engineering survey of hish—speed railway．The research result provides theoretical basis for the specification of divergence tolerance of elevation and altitude difference between adjoining points of high—speed railway With CPⅢ
|
|
Received: 11 July 2010
|
|
|
|
|
|
[1] TB 10601-2009,高速铁路工程测量规范[S].
TB 10601-2009, Code for Engineering Survey of High Speed Railway[S].
[2] 程昂,刘成龙,徐小左. CPIII平面网必要点位精度的研究 [J].铁道工程学报, 2009(1): 44 -48.
Cheng Ang, Liu Chenglong, Xu Xiaozuo. Research on the Positional Accuracy Required for CPIII Network [J]. Journal of Railway Engineering Society, 2009(1): 44 -48.
[3] 李毛毛.无砟轨道CPIII控制网数据处理方法研究及其软 件的集成[D ].成都:西南交通大学, 2007.
Li Maomao. Research on Data Processing and Software Integration of Ballastless Track Base -piles CPIII[D ]. Chengdu: Southwest Jiaotong University, 2007.
[4] 武汉大学测绘学院-测量平差学科组.误差理论与测量 平差基础[M ].武汉:武汉大学出版社, 2005.
Surveying Adjustment Subject Group of School of Geodesy and Geomatics in Wuhan University. Error Theory and Foundation of Surveying Adjustment[M ]. W uhan: Wuhan University Press, 2005.
[5] 於宗俦,于正林.测量平差原理[M ].武汉:武汉测绘科技 大学出版社, 1989.
Yu Zongchou, Yu Zhenglin. Principles of Surveying Adjustment[M ]. Wuhan: Wuhan Technical University of Surveying and Mapping Press, 1989.
|
|
|
|
2010, Vol. 27 
