|
|
|
| Structure Inspection Test and Condition Assessment on Existing 900 t Bridge Erecting Machine |
| CHEN Shi-tong1，ZHANG Wen-xue2，ZHANG Yao-hui1，WANG Chun-sheng1 |
| 1 .Shijiazhuang Tiedao University，Shijiazhuang，Hebei 050043，China;2. Beijing University of Technology，Beijing 100124，China |
|
|
|
|
Abstract Research purposes: For the bridge erecting machine，the working environment is complex，the safety accidents frequently occur, and the existing safety assessment for bridge erecting machine structure does not meet the need of engineering. Through the field tests including stress level，static stiffness，dynamic stiffness and surface corrosion on box-beam structure bridge erecting machine and truss structure bridge erecting machine，combining with the visual examination，the typical disease of the two structure form bridge erecting machines was purposed. The fuzzy evaluation factor subset was built，then the fuzzy comprehensive evaluation method was applied to the structure safety condition assessment of the bridge erecting machine.
Research conclusions:(1)The structure state of existing 900 t bridge erecting machine is not optimistic，the corrosion and defect，structural deformation and dynamic stiffness fail to meet the requirement of national standard，which need to be reinforced by adopting the technique measures.(2)The phenomena of surface corrosion are widespread on the box- beam structure bridge erecting machine，and even the corrosion penetration is larger than the national standard in some areas.(3)The phenomena of structural deformation and bolt fracture occur in the truss structure bridge erecting machine. ( 4)Based on test results，by using the fuzzy comprehensive evaluation method，the evaluation factor may be applied to the structure safety condition assessment of the bridge erecting machine.(5)This research result is helpful for structure inspection test and condition assessment of existing bridge erecting machine.
|
|
Received: 09 March 2015
|
|
|
|
|
|
|
Zhang Xiaoli , Chen Xuefeng , Li Bing , etc. Review of Life Prediction for Mechanical Major Equipments[J]. Journal of Mechanical Engineering, 2011(11):100- 116.
|
| [2] |
张小丽，陈雪峰，李兵，等.机械重大装备寿命预测综述 [J].机械工程学报，2011(11):100-116.
|
| [6] |
陈士通，孙志星，李向东，等.基于线刚度比的提梁机结 构动力特性分析[J].铁道工程学报，2011 ( 11 ):77- 81,97.
|
|
Chen Shitong, Sun Zhixing, Li Xiangdong, etc. Dynamic Characteristic Analysis of Girder Hoisting Machine Structure Based on Linear Stiffness Ratio [ J]. Journal of Railway Engineering Society, 2011(11) 77-81,97.
|
|
Qi Kai, Wang Xinhua, He Chengzhong. Research of Crane Machinery Security Early Warning Mechanism [J].China Safety Science Journal, 2011(1):136- 139.
|
| [5] |
AL-ASSAF Y, EI Kadi H. Fatigue Life Prediction of Compositere Currentmate Rialsusing Polynomial Classifiers and Neural Networks[J].Composite Structures,2007(4):561-569.
|
| [1] |
齐凯，王新华，何成忠.大型起重机械安全预警机制的研 究[J].中国安全科学学报，2011(1):136-139.
|
| [4] |
KIM Y H, SONG J H, PARK J H. An Expert System Forfatigue Life Prediction under Variable Loading[J]. Expert Systems with Applications, 2009(3):4996- 5008.
|
|
Li Xueyan, Liu Jike. Damage Identification of Beams Based on the Vibration Sensitivity Analysis[J]. Journal of South China University of Technology (Natural Science Edition)，2003 ( S ) : ll9-121.
|
| [3] |
Liu X , Xuan F Z , SI J , etc. Expert System Forremnant Life Prediction of Defected Components underfatigue and Creep-fatigue Loadings[J].Expert Systems with Applications , 2008 (1):222-230.
|
| [7] |
李雪艳，刘济科.基于振动特性灵敏度分析的梁结构损伤 识别[J].华南理工大学学报(自然科学版), 2003（S）: 119-121.
|
|
|
|
2015, Vol. 32 
