地下区间联络通道防火门设计探讨

Abstract
Figure/Table
References (0)
Related Citation (2)

Download: PDF (402 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Research purposes:The fire door of underground connection passage is often ignored in the construction drawing of design file，but it is crucial to the security of the subway operation． According to the design file，this paper discourse the reasons for the door failure of the connection passage in service and also discusses the matters for caution and detailed requirements stipulated in the construction drawings and files on the fire door．

Research conclusions:(1)The reason for the failure of the fire door is that the door is pressed by wind in the tunnel for a long time，so the door is broken more easily in the long tunnel．(2) The fire door＇s renitency must be resistant to the wind pressure of 3.5 kPa．(3) The fire door＇s frame and inner structure must be antisepticized by galvanization．(4) The heavy duty door closer and hinge should be used to the fire door．(5) The fire door＇s frame must be installed in concrete structure and the parts for installation of the door frame should be installed in the concrete structure in advance to reduce the connection by the screw and bolt．(6) The management and maintenance should be strengthened to the door in service．

Key words： underground track fire door of connection passage reason for failure design requirement of construction drawing operations security

Received: 31 December 2012

PACS:

U25

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Ming － sheng

Cite this article:

WANG Ming － sheng. Discussion on Design of Fire Door of Underground Connection Passage[J]. 铁道工程学报, 2013, 30(4): 116-119.

URL:

http://tdgcxb.crec.cn/EN/ OR http://tdgcxb.crec.cn/EN/Y2013/V30/I4/116

［1］ GB 50157—2003，地铁设计规范［S］．

GB 50157—2003，Code For Design of Metro［S］．

［2］ JB 104—2008，城市轨道交通工程项目建设标准［S］．

JB 104—2008，City Rail Transit Project Construction Standards［S］．

［3］ GB 50490—2009，城市轨道交通技术规范［S］．

GB 50490—2009，Technical Code of Urban Rail Transit ［S］．

［4］施仲衡．地下铁道设计与施工［M］．西安: 陕西科学技术出版社，2006．

Shi Zhongheng．Design and Construction of Underground Railway［M］．Xi’an: Shanxi Science and Technology Press，2006．

［5］刘志义．地铁设计实践与探索［M］．北京: 中国铁道出版社，2009．

Liu Zhiyi． Metro Design and Practices［M］．Beijing: China railway press，2009．

［6］刘伊江．高速地铁隧道压力波研究及隧道断面拟定［J］．铁道标准设计，2010(S2) :119－124．

Liu Yijiang． High Speed Subway Tunnel Pressure Wave Research and Tunnel Protocol［J］．Railway Standard Design，Supplement，2010(S2) : 119－124．

［7］苏晓峰．小间距地铁隧道设计思路［J］．铁道工程学报， 2008(8) : 89－92．

Su Xiaofeng． Discussion on the Design of Neighborhood Tunnels［J］．Journal of Railway Engineering Society， 2008(8) : 89－92．

［8］铁道第三勘察设计院集团有限公司．天津地铁 5 号线工程施工图设计要求［Z］．天津: 铁道第三勘察设计院集团有限公司，2011．

The Third Railway Survey and Design Institute Group Corporation． Tianjin Metro Line 5 Construction Drawing Design Technical Requirements ［Z］．Tianjin: The Third Railway Survey and Design Institute Group Corporation，2011．

［9］铁道第三勘察设计院集团有限公司．北京轨道交通大兴线线工程施工图设计要求［Z］．天津: 铁道第三勘察设计院集团有限公司，2008．

The Third Railway Survey and Design Institute Group Corporation． Beijing Metro line Daxing Construction Drawing Design Technical Requirements ［Z］．Tianjin: The Third Railway Survey and Design Institute Group Corporation，2008．

［10］北京城建设计研究总院有限责任公司．北京地铁14 号线工程施工图设计要求［Z］．北京: 北京城建设计研究总院有限责任公司，2009．

Beijing Urban Engineering Design ＆ Research Institute Co． Ltd． Beijing Metro line 14 Construction Drawing Design Technical Requirements ［Z］．Beijing: Beijing Urban Engineering Design ＆ Research Institute Co． Ltd，2009．

［11］广州地铁设计研究院有限公司．广州市轨道交通6号线车站装修工程材料供应及施工安装技术要求［Z］．广州: 广州地铁设计研究院集团有限公司，2010．

Guangzhou Metro Design ＆ Research institute Co． Ltd． Guangzhou Metro Line 6 Station Renovation Project Materials Supply and Construction of the Installation Technical Requirements［Z］．Guanghzou: Guangzhou Metro Design ＆ Research institute Co．Ltd，2010．