|
|
|
| Research on Optimal Design of Wheel Load Transition Zone of Turnout Switch |
| MENG Xiang - hong1，WANG PING2 |
| 1. China Railway Group Limited， Beijing 100039， China; 2. Southwest Jiaotong University， Chengdu， Sichuan 610031，China |
|
|
|
|
Abstract Research purposes : Based on the research on the change regulation of the wheel load of the turnout switch in the transition zone， the design indexes and structure irregularity indexes were given out according to the actual production，then design method was presented for the dynamic parameters for the turnout，and the computation program for the geometric relation of static contact between the wheel and rail in the turn out zone was worked out to make the fast and optimal design of the wheel load transition zone of the turnout switch.
Research conclusions: The analysis of the EMU with LMA type tread straightly passing the Turnout 18 At the speed of 350km/h was made with the design method for the dynamic parameters for the turnout and the computation program for the geometric relation of static contact between the wheel and rail in the turnout zone presented in this paper. The analysis result showed the reduction of the top surface value of the initial bearing section of the switch rail was beneficial to increasing of the transverse acceleration of the train body. The more back the transfer point of the wheel load stayed at，the more obviously the transverse and lateral regularities of the turnout increased. Although the longitudinal gradient of the top surface of the switch rail decreased，but it was harmful to the transverse stability of the train body. The optimal design scheme was presented for the relation between the wheel and rail when the train passing the Turnout 18 at the speed of 350 km/h. The application showed this scheme was reasonable and feasible in the design of dynamic parameters.
|
|
Received: 29 January 2013
|
|
|
|
|
|
[1]郝瀛.铁道工程[M].北京：中国铁道出版社，2002.
Hao Yin. Railway Engineering [ M ]. Beijing ： China railway Publishing House,2002.
[2]任尊松，孙守光.道岔区轮轨接触几何关系研究[J].工程力学，2008(11) ：223 -230.
Ren Zunsong，Sun Shouguang. Study on The Wheel/ rail Contact Geometry Relation of The Turnout Zone [J]. Engineering Mechanics，2008(11) :223 -230.
[3]王平.道岔区轮轨系统空间耦合振动模型及其应用[J]. 西南交通大学学报，1998(3) :84 -289.
Wang Ping. A Spatial Coupling Model for Railway Turnout and Its Application [ J ]. Journal Southwest Jiaotong University，1998(3) :284 -289.
[4] Hiroyuki Sugiyama， Yoshimitsu Tanii， Ryosnke Matsumura. Analysis of Wheel/Rail Contact Geometry on Railroad Turnout Using Longitudinal Interpolation of Raii Profiles [ J]. Vehicle System Dynamics，2011(4)： 024501 -1 -024501 -5.
[5] Gurule S，Wilson N. Simulation of Wheel/ rail Interaction in Turnouts and Special Trackwork [ C ] // 16th IASD Symposium Pretoria. South Africa， 1999 ： 35-37.
[6] C Andersson，T Dahlberg. Wheel/rail Impacts at a Railway Turnout Crossing [ J ]. Proc Instn Mech Engrs. 1997(4) ：123 -134.
[7] NicholasWilson， HuiminWu，Harry Tournay and Curtis Urban. Effects of Wheel/rail Contact Patterns and Vehicle Parameters on Lateral Stability [ J ]. Vehicle System Dynamics,2010(S) :487 -503.
[8]王平.道岔转辙器部分的力学特性分析[J].西南交通大学学报，2000(1)79 -82.
Wang Ping. Analysis of Mechanical Char Acter Istic for Switch Proper of Turnout [ J ]. Journal of Southwest Jiaotong University，2000(1) :79 -82.
[9]刘学毅，王平.车辆-轨道-路基系统动力学[M].成都：西南交通大学出版社，2010.
Liu Xueyi ，Wang Ping. Vehicle - Track - Roadbed Dynamics[ M]. Chengdu： Southwest Jiaotong University Publishing House,2010.
[10]西南交通大学.武广客运专线时速350 km无砟道岔试验报告[R].成都：西南交通大学，2009.
Southwest Jiaotong University. Test Report of Wuguang Dedicated Passenger Line with 350 kmh Ballastless Turnout [ R]. Chengdu: Southwest Jiaotong University， 2009.
[11]曹洋，王平，徐井芒.道岔平面线型发展概况及设计方法研究[J].铁道工程学报，012(增刊）：16-20.
Cao Yang，Wang Ping，Xu Jingmang. Development of Turnout Plane Linetype and Research on Its Design Method[ J]. Journal of Railway Engineering Society， 2012(S) ：16-20.
[12]曹洋，王平.基于平面参数法的道岔线型设计研究[J]. 铁道建筑，2011(1) :10 1 -103.
Cao Yang， Wang Ping. Study on Turnout Linear Design Based on The Method of Plane Parameters [ J ]. Railway Engineering，2011(1) :101 -103.
|
|
|
|
2013, Vol. 30 
